>> Product >> Cemply Sheet

Cemply Cement Product

    INTRODUCTION

    Cemply, an ideal substitute for water proof plywood is a versatile product from Sahyadiri Industries Limited- a Pune based listed company. This flat cement sheet is as per IS 2096 and has variety of application. Cemply is composed of following materials:

    CEMPLY COMPOSITION

    Cement 50 To 55%
    Pozzolonic Material 27 To 32 %
    Crysolite Fibre 9 To 11%
    Additives 2 To 3 %

    Crysotile or white asbestos fibre is the sole species obtained from the serpentine group of rock formation. This fibres are white and silky in nature and have great tensile strength which is made use of in reinforcing Asbestos Cement Products. It has following Advantages :

    • It is alkali resistant and does not corrode; hence it can be used to manufacture thin sections.
    • It is not brittle and has high tensile strenght. it is resilient and has a great affinity to cement.
    • It has a fibrous structure and hence offers more surface area to be covered by cement.
    • It is non-destructible, non-inflammable and non-organic.
    • It has a high slenderness ratio, which is advantageously used for reinforcing the end products.

    Fine Cement Products are the proud distributor for this wonderful product for Rajkot district.

    Application Recommended Thickness in mm
    4 6 8 10 12 14 16 18
    False Ceiling -- -- -- -- -- --
    Wall Cladding -- -- -- -- -- --
    Partition --
    Floors -- -- -- --
    Black Line of Almirah -- -- -- -- -- -- --
    Elec. Meter Panel Board -- -- --
    A/c Dust Cover -- -- -- -- -- --
    Cable Trench Covers -- -- --
    Furniture -- --
    Shelves -- --
    Mezzzaine -- -- -- --

    Characteristic

    Minimum Bending Strength (Modulus of Rapture) In N/mm2 (MPa)

    A) Loading Parallel to the fibre of the sheets is 13 MPa.
    B)Loading at right angle to the fibre of the sheets is 16MPa.

    Average modulus of rupture, which shall be the average of the values obtained from testing the samples in both direction is 14.5 MPa.

    Density Not less than 1.20 G/CC
    Water Absorption 28 To 30 %
    Moisture Absorption 2 To 5 %
    Self Life More than 50 Year except any accidental damages.

    FEATURES

    Technical Specifications

    Standard Sizes(mm) 2440 x 1220 | 1830 x 1220 | 1220 x 1220
    Standard sizes (feet) 8'x4' | 6'x4' | 4'x4'
    Thickness 4,6,8,10,12,14,16,18 mm
    Weight per Sq. meter(4 mm thick) 5.5 Kg. (Approx)
    Free moisture content 10 % (Approx)
    Density(min) 1.2 gm/cm3 (Category I)
    Thermal Conductivity(K value) 0.196 Kcal / MH deg. C.
    Bending Strength (min.)
       a. Parallel
       b. Right angles(across)
    13 N/mm2 (127.4 kg/cm2)
    16 N/mm2 (156.8 kg/cm2)
    Screw Withdrawal Test Satisfactory (Upto 160 Kg Load)

    FEATURES